HL-484 48-Inch High-Lift Cast & Steel Jack

The HL-484 high-lift jack is a versatile 48-inch mechanical tool designed for suitable lifting, winching and clamping tasks. Its mix of cast and high-strength stamped-steel parts provides the strength needed for demanding off-road, recovery and utility work.

Whether you need to lift a wheel clear of an obstacle or prepare the vehicle for recovery, this jack gives you several useful options. However, you must always use it with the correct lifting points, attachments and safety procedures.

HL-484 High-Lift Jack Specifications

• Model: HL-484
• Jack size: 48 inches or 122cm
• Rated lifting load: 4,660lb or 2,113kg
• Tested load: 7,000lb or 3,175kg
• Winching capacity: 5,000lb or 2,268kg
• Clamping capacity: 750lb or 340kg
• Minimum lifting height: 4.5 inches or 11.43cm
• Maximum lifting height: 37.24 inches or 94.59cm
• Approximate jack weight: 12.55kg
• Cast and high-strength stamped-steel construction

Versatile Off-Road Recovery Tool

A standard vehicle jack may not provide enough reach on uneven terrain or a modified 4×4. In contrast, the 48-inch Hi-Lift jack offers an extended lifting range for suitable recovery situations.

For example, it can help raise a wheel so that you can fill a hole, remove an obstacle or place a recovery board beneath the tyre. In addition, compatible attachments allow the jack to perform selected winching, pulling or clamping tasks.

Cast and Steel Construction

The HL-484 combines cast components with four high-strength stamped-steel parts. As a result, it provides the same rated performance as the manufacturer’s all-cast model while keeping the design practical and easy to handle.

Furthermore, the mechanical design does not depend on hydraulic fluid or an electrical supply. This makes the cast and steel jack a useful addition to an off-road recovery kit when travelling through remote areas.

Correct Lifting Points and Accessories

Only use the jack on a strong, stable and approved lifting point. Many standard plastic bumpers cannot safely support a high-lift jack. Therefore, you may need a compatible bumper, rock slider, wheel attachment or approved lifting adaptor.

Also, place the jack on firm and level ground whenever possible. A suitable off-road base can provide more support on sand, mud or soft soil. Before lifting, secure the vehicle and prevent it from rolling.

Important High-Lift Jack Safety

Inspect the climbing mechanism, handle, shear bolt and steel bar before every use. Keep your head and body away from the handle because it can move suddenly during operation. Moreover, maintain a firm grip and follow the manufacturer’s operating instructions.

Warning: Never work beneath a vehicle supported only by the HL-484 high-lift jack. Once lifted, lower the vehicle onto correctly rated axle stands or another secure support system. Never exceed the rated load or use a damaged jack.