Suzuki Jimny Gen 3 EV1L50 50mm Suspension Kit – Pack 3

Jimny Gen 3 Suspension Kit

The Jimny Gen 3 suspension kit from Des Sol combines a functional 50mm lift with EV1L50 remote-reservoir shock absorbers and dual-rate coils. As a result, Pack 3 delivers dependable control for daily driving, loaded touring and off-road travel.

The complete package also includes castor correction bushes and extended hoses. Therefore, the main supporting components required for the increased suspension height are supplied together.

Key EV1L50 Features

• Large-bore monotube shock design
• Remote reservoirs for increased oil capacity
• 44.5mm piston diameter
• Hard-anodised aluminium shock bodies
• Performance hard-anodised shock tubes
• High oil volume to help reduce shock fade
• Rebuildable, serviceable and tuneable construction
• Designed for demanding road and off-road conditions

EV1L50 Remote-Reservoir Performance

The EV1L50 shock absorbers use a large-bore monotube design to provide steady damping and improved suspension control. In addition, the remote reservoirs increase the available oil volume and help the shocks manage heat during demanding use.

Consequently, this EV1L50 suspension package helps reduce shock fade when travelling over rough terrain for long periods. The hard-anodised aluminium bodies also transfer heat efficiently while providing added protection against wear.

Unlike the EV1L50-ADJ range, these shock absorbers do not have external high-speed and low-speed adjusters. However, Des Sol can service and re-valve them when the vehicle setup or load changes.

Dual-Rate Coils for Changing Loads

The dual-rate coils use two spring rates to balance comfort and load support. First, the softer section supports ride comfort and suspension movement when the Jimny carries less equipment. Meanwhile, the firmer section provides extra support as the vehicle load increases.

Therefore, the Jimny Gen 3 50mm suspension can handle everyday driving as well as touring equipment and additional vehicle weight.

Steering Geometry and Supporting Parts

The included castor correction bushes help restore steering geometry after the 50mm suspension lift. As a result, they support better steering feel, stability and control.

Extended brake hoses and vacuum hoses are also included to support the added suspension height and travel. However, professional installation and a wheel alignment are recommended after fitting the kit.

Who This Kit Suits

This Suzuki Jimny Gen 3 lift kit suits drivers who want a complete 50mm suspension package without external damping adjusters. It is suitable for daily driving, weekend trails and touring vehicles that carry changing equipment loads.

What Pack 3 Includes

• Dual-rate coil springs
• Castor correction bushes
• EV1L50 remote-reservoir shock absorbers
• Reservoir mounting brackets
• Extended brake hoses
• Extended vacuum hoses

Together, these components create a balanced Jimny Gen 3 suspension kit designed to improve ride control, suspension travel and support at the lifted ride height.

Warranty and Service Information

Des Sol designed the EV1L50 shocks so they can be rebuilt, serviced and tuned. Therefore, if your Jimny gains weight after you add accessories, Des Sol can re-valve the shocks for the updated load. Labour and shim-stack costs may apply.

• Eight-year limited warranty when the required service plan is maintained
• Service interval of four years or 80,000km, whichever comes first
• Rebuildable and serviceable shock construction
• Modular design that supports future upgrades
• Des Sol designed and manufactured

Important: This kit is designed for the Suzuki Jimny Gen 3 and provides approximately 50mm of suspension lift. Professional fitment and a wheel alignment are recommended.