Suzuki Jimny Gen 3 Winch Bumper

The Jimny Gen 3 winch bumper adds front-end protection, recovery points and winch compatibility to your vehicle. Its compact Slimline design also helps improve the Jimny’s approach angle during off-road driving.

Des Sol makes the bumper from corrosion-resistant steel. In addition, its coated finish helps protect the bumper from wear during road and off-road use.

Jimny Gen 3 Winch Bumper

The Jimny Gen 3 winch bumper weighs approximately 26kg with the bash plate, recovery points and shackles fitted. As a result, it combines several important off-road features in one compact front bumper.

• Designed for the Suzuki Jimny Gen 3
• Slimline off-road bumper design
• Corrosion-resistant steel construction
• Approximate fitted weight of 26kg
• Front bash plate included
• Built-in recovery points
• 3.5-ton shackles included
• Winch-ready design

Winch-Ready Slimline Design

The bumper does not include a winch as standard. However, you can add a compatible winch later without removing the complete bumper from the vehicle.

First, remove the standard front grille section. You can then fit the winch and replace the grille with the correct winch-compatible section. Therefore, future winch access remains straightforward.

Off-Road Protection and Recovery Features

The included bash plate helps protect vulnerable parts at the front of the Jimny. Meanwhile, the built-in recovery points provide secure mounting locations for correctly rated recovery equipment.

In addition, the supplied 3.5-ton shackles provide practical recovery connections. Always match the shackles, recovery gear and recovery method to the vehicle and situation.

Improved Approach Angle

The Suzuki Jimny Gen 3 bumper uses a tighter profile than the original front bumper. Consequently, it can improve the vehicle’s approach angle when climbing steep banks or crossing obstacles.

However, the actual clearance will depend on tyre size, suspension height and vehicle load. Therefore, inspect the route and choose an appropriate driving line before approaching an obstacle.

Jimny Winch Bumper Fitment

The bolt-on design allows fitment without grinding, drilling or welding during a standard installation. Furthermore, it makes the bumper suitable for Jimny owners who prefer a clean replacement-style setup.

• Confirm Gen 3 compatibility before ordering.
• Confirm the winch model and mounting requirements.
• Use a trained installer where required.
• Check all recovery-point and bumper bolts.
• Recheck the mounting hardware after initial use.
• Inspect the bumper after every hard recovery or impact.

Important: The winch is not included unless stated separately on your order. Never exceed the limits of the vehicle, recovery points, shackles, winch or recovery equipment.