Suzuki Jimny Gen 4 EV1L50 50mm Overlanding Suspension Kit – Pack 3

Jimny Gen 4 Overlanding Suspension

The Jimny Gen 4 overlanding suspension package from Des Sol provides approximately 50mm of lift for touring and off-road travel. Pack 3 combines EV1L50 remote-reservoir shocks with dual-rate coils and supporting components. As a result, the kit improves control across changing roads, loads and terrain.

Castor correction bushes and adjustable Panhard bars help correct the suspension geometry after the lift. In addition, extended hoses, a headlight adjustment bracket and a crossmember support the increased suspension height.

Key EV1L50 Features

• Large-bore monotube shock design
• Remote reservoirs for increased oil capacity
• 44.5mm piston diameter
• Hard-anodised aluminium shock bodies
• Performance hard-anodised shock tubes
• High oil volume to help reduce shock fade
• Rebuildable, serviceable and tuneable construction
• Built for demanding touring and off-road conditions

EV1L50 Remote-Reservoir Performance

The EV1L50 shocks use a large-bore monotube design to provide steady damping and dependable suspension control. Meanwhile, the remote reservoirs increase the available oil volume. This helps the shocks manage heat during long periods of hard use.

Therefore, the EV1L50 overlanding suspension helps reduce shock fade on rough tracks and long gravel roads. Furthermore, the hard-anodised aluminium bodies provide effective heat control and protection against wear.

These EV1L50 shocks do not have external high-speed and low-speed adjusters. However, Des Sol can service and re-valve the shocks when the vehicle’s weight or setup changes.

Dual-Rate Coils for Touring Loads

The dual-rate coils use two spring rates to balance comfort and load support. First, the softer section supports ride comfort when the Jimny carries less equipment. Meanwhile, the firmer section provides additional support as the touring load increases.

Consequently, this Jimny Gen 4 50mm lift kit can support daily driving and weekend trails. It can also accommodate camping gear, recovery equipment and other touring accessories.

Correcting Geometry After the Lift

Castor correction bushes help restore steering geometry after the 50mm lift. As a result, they support better steering feel and vehicle stability.

The adjustable Panhard bars allow the front and rear axles to be repositioned beneath the vehicle. Therefore, they help correct the sideways axle movement caused by lifting the suspension.

Extended brake and vacuum hoses support the additional suspension height and travel. In addition, the headlight adjustment bracket helps correct the sensor position after lifting the vehicle.

Crossmember and Chassis Clearance

The included crossmember provides added clearance for the front driveshaft at the lifted ride height. Consequently, it helps prevent contact as the suspension moves through its available travel.

Professional installation and a wheel alignment are recommended. The installer should also inspect all hoses, driveshaft clearance and suspension parts throughout their full range of movement.

Who This Touring Kit Suits

This Suzuki Jimny Gen 4 overlanding kit suits drivers who want increased ground clearance and dependable damping without external shock adjusters. It is suitable for daily use, weekend trails and loaded touring vehicles.

Additionally, the supporting geometry components make Pack 3 a more complete choice for drivers who use their Jimny across a wide range of terrain.

What Pack 3 Includes

• Dual-rate coil springs
• Castor correction bushes
• EV1L50 remote-reservoir shock absorbers
• Reservoir mounting brackets
• Extended brake hoses
• Extended vacuum hoses
• Headlight adjustment bracket
• Front and rear adjustable Panhard bars
• Crossmember

Together, these components create a complete Jimny touring suspension kit. Pack 3 supports improved ride control, suspension travel, axle alignment and load handling at the lifted ride height.

Warranty and Service Information

Des Sol designed the EV1L50 shocks so they can be rebuilt, serviced and tuned. Therefore, if your Jimny gains weight after you add accessories, Des Sol can re-valve the shocks for the updated load. Labour and shim-stack costs may apply.

• Eight-year limited warranty when the required service plan is maintained
• Service interval of four years or 80,000km, whichever comes first
• Rebuildable and serviceable shock construction
• Modular design that supports future upgrades
• Des Sol designed and manufactured

Important: This kit is designed for the Suzuki Jimny Gen 4 and provides approximately 50mm of suspension lift. Professional fitment and a wheel alignment are recommended.