Suzuki Jimny Gen 4 EV1L50 50mm Suspension Lift Kit – Pack 2

Jimny Gen 4 Suspension Lift

The Jimny Gen 4 suspension lift from Des Sol provides approximately 50mm of added ride height. Pack 2 combines EV1L50 remote-reservoir shocks with dual-rate coils and castor correction bushes. As a result, it improves control during daily driving, touring and off-road use.

The kit also includes supporting parts for the increased suspension height. Therefore, it provides a well-matched upgrade for drivers who want a capable Jimny without externally adjustable shock settings.

Key EV1L50 Features

• Large-bore monotube shock design
• Remote reservoirs for increased oil capacity
• 44.5mm piston diameter
• Hard-anodised aluminium shock bodies
• Performance hard-anodised shock tubes
• High oil volume to help reduce shock fade
• Rebuildable, serviceable and tuneable design
• Built for demanding road and off-road conditions

EV1L50 Remote-Reservoir Performance

The EV1L50 shocks use a large-bore monotube design to provide steady damping and improved suspension control. Meanwhile, the remote reservoirs increase the available oil volume. This helps the shocks manage heat during long periods of hard use.

Consequently, the EV1L50 suspension kit helps reduce shock fade on rough tracks and long gravel roads. In addition, the hard-anodised aluminium bodies provide good heat control and protection against wear.

These EV1L50 shocks do not have external high-speed and low-speed adjusters. However, Des Sol can service and re-valve them when the vehicle’s weight or setup changes.

Dual-Rate Coils for Changing Loads

The dual-rate coils use two spring rates to balance comfort and load support. First, the softer section supports ride comfort when the Jimny carries less equipment. Meanwhile, the firmer section provides additional support as the load increases.

Therefore, this Jimny Gen 4 50mm suspension works well for everyday use and weekend trips. It can also support touring equipment and other added accessories.

Supporting the 50mm Lift

The included castor correction bushes help restore steering geometry after the lift. As a result, they support better steering feel and vehicle stability.

Extended brake and vacuum hoses support the additional suspension height and travel. In addition, the headlight-level sensor bracket helps correct the sensor position after lifting the vehicle.

However, professional installation and a wheel alignment are recommended. The installer should also inspect all hoses and suspension parts throughout their full range of movement.

Who This Kit Suits

This Suzuki Jimny Gen 4 lift kit suits drivers who want improved ground clearance and dependable damping without external shock adjusters. It is suitable for daily driving, weekend trails and touring vehicles with changing equipment loads.

What Pack 2 Includes

• Dual-rate coil springs
• Castor correction bushes
• EV1L50 remote-reservoir shock absorbers
• Reservoir mounting brackets
• Extended brake hoses
• Extended vacuum hoses
• Headlight-level sensor relocation bracket

Together, these parts create a balanced Jimny Gen 4 suspension lift. Pack 2 supports improved ride control, suspension travel and load handling at the lifted ride height.

Warranty and Service Information

Des Sol designed the EV1L50 shocks so they can be rebuilt, serviced and tuned. Therefore, if your Jimny gains weight after you add accessories, Des Sol can re-valve the shocks for the updated load. Labour and shim-stack costs may apply.

• Eight-year limited warranty when the required service plan is maintained
• Service interval of four years or 80,000km, whichever comes first
• Rebuildable and serviceable shock construction
• Modular design that supports future upgrades
• Des Sol designed and manufactured

Important: This kit is designed for the Suzuki Jimny Gen 4 and provides approximately 50mm of suspension lift. Professional fitment and a wheel alignment are recommended.